Pipe Systems

Norox FS-100/9 is primarily used in highly filled resin systems. It is not recommended for gel coats or vinyl ester resins.

Norox 771 is an excellent liquid polymerization initiator for the room temperature cure of unsaturated polyester and vinyl ester resins, when a low peak exotherm is desired.

Norox TBPB is a highly efficient source of free radicals at moderate to high temperatures and can be used as a polymerization or co-polymerization initiator to produce polyethylene, polystyrene and polyacrylates.

Norox W-60 works well in any application where high amounts of water are present. Combining fast gel times with moderate cure profiles, it is not recommended for gel coats.

It is an effective medium temperature initiator for the polymerization and/or crosslinking of numerous monomers and resins, including unsaturated polyester and vinyl ester resins.

Norox Pulcat AW can also be used in cobalt promoted resins for ambient temperature cures.

Norox P-20 is an efficient moderate to high temperature initiator for the polymerization of monomers and resins with vinyl unsaturation.

NOROX MEKP-9H is a methyl ethyl ketone peroxide which features a reduced level of hydrogen peroxide compared to Andonox KP - 9 and gives a longer gel time when workshop and resin temperatures increase during warm weather.

NOROX MEKP - 925H is specifically formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in gel coats, barrier coatings, and corrosion resistant structures.