BENOX L-40LV is a low viscosity, sprayable dispersion of dibenzoyl peroxide (BPO).
Application Details:
BENOX L-40LV is a dibenzoyl peroxide (BPO) specifically designed for use in “curing” unsaturated polyester and vinyl ester resins and can also be used as a polymerization initiator for vinyl monomers, (e.g. styrene, acrylate, etc.).
ANDONOX SG - 10 is a methyl ethyl ketone peroxide (MEKP) in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.
Application Details:
ANDONOX SG-10 is a methyl ethyl ketone peroxide (MEKP) with high active oxygen and hydrogen peroxide level to provide faster gel and cure times. It is suitable for production of button sheets, continuous laminating, centrifugal casting and polyester concrete. (Due to the high hydrogen peroxide level, it is not recommended for use with gelcoats.)
ANDONOX MEC is a colourless solution of methyl ethyl ketone peroxide and cyclohexanone peroxide in phlegmatiser.
Application Details:
ANDONOX MEC provides excellent cure performance in low and average temperature conditions when used as an initiator with gelcoats & unsaturated polyester resins.
ANDONOX KP - 9S is a methyl ethyl ketone peroxide (MEKP) in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.
Application Details:
ANDONOX KP-9S is a MEKP with a higher content of free hydrogen peroxide than to provide shorter gel time than ANDONOX KP - 9. It is suitable for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and vacuum infusion.
ANDONOX ENP -80 is a medium active methyl ethyl ketone peroxide (MEKP) in proprietary phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerator.
Application Details:
ANDONOX ENP-80 is a phthalate free methyl ethyl ketone peroxide (MEKP) which gives consistent room temperature performance with unsaturated polyester resins.
ANDONOX ENP - 90 is a medium active methyl ethyl ketone peroxide (MEKP) in proprietary phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerator.
Application Details:
ANDONOX ENP-90 is a phthalate free methyl ethyl ketone peroxide (MEKP) suitable for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and vacuum infusion.
The Syrgis companies provide a variety of chemicals that assist in the manufacture of paint, lacquer and varnish, and glues used in a wide range of products.
