Automotive and Marine Manufacturing | Syrgis Performance Initiators

Norox FS-100/9

Chemical Name:

methyl ethyl ketone peroxide

CAS Numbers:

1338-23-4

Norox FS-100/9 is an MEKP formulation high in hydrogen peroxide content that provides fast gel and green strength development.

Application Details:

Norox FS-100/9 is primarily used in highly filled resin systems. It is not recommended for gel coats or vinyl ester resins.

Active Oxygen Content: 9.0 %, max.

Physical Appearance: Water white liquid

Soluble In: Ketones, lower alcohols & ethers

Moderately soluble In: Esters (Partially soluble in hydrocarbon solvents & water)

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Norox 771

Chemical Name:

methyl ethyl ketone peroxide & cumyl hydroperoxide

Norox 771 is a solution of methyl ethyl ketone peroxides and cumyl hydroperoxide in phlegmatizer.

Application Details:

Norox 771 is an excellent liquid polymerization initiator for the room temperature cure of unsaturated polyester and vinyl ester resins, when a low peak exotherm is desired.

Active Oxygen Content: 9.0 %, max.

Physical Appearance: Water white liquid

Soluble In: Oxygenated organic solvents

Moderately soluble in: Water

Storage Temperature: 80°F or below is recommended (below 70°F recommended for maximum shelf life)

Technical Data Sheet

Andonox 7030

Chemical Name:

peroxide mixtures

ANDONOX^®7030 is a mixture of ketone peroxides with dimethyl phthalate as a phlegmatiser.

Application Details:

ANDONOX^® 7030 is an initiator for the curing of most polyester resins at both room - and elevated temperatures. It is best suited for singly promoted resins using cobalt promotion alone.

Active Oxygen Content: 5.2 - 5.7%

Physical Appearance: Slightly yellow and clear liquid

Soluble In: Oxygenated organic solvents

Insoluble In: Water

Storage Temperature: Min 0°C, max 25°C

SDS

MSDS

Technical Data Sheet

Andonox KP-LE

Chemical Name:

peroxide mixtures

ANDONOX KP-LE is a methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

Application Details:

ANDONOX KP-LE is a MEKP with a higher content of free hydrogen peroxide than to provide shorter gel time then the ANDONOX KP-9. It is suitable for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and vacuum infusion.

Active Oxygen Content: 8.7 - 9.0 %

Physical Appearance: Colourless and clear liquid

Soluble In: Oxygenated organic solvents

Insoluble In: Water

Storage Temperature: Max 25C

Technical Data Sheet

MSDS

SDS

Superox 46-770

Chemical Name:

methyl ethyl ketone peroxide & cumyl hydroperoxide

Superox 46-770 is a solution of methyl ethyl ketone peroxides and cumyl hydroperoxide in phlegmatizer.

Application Details:

Superox 46-770 is an excellent liquid polymerization initiator for the room temperature cure of unsaturated polyester and vinyl ester resins, when a low peak exotherm is desired.

Active Oxygen Content: 9.0 %, max.

Physical Appearance: Pale yellow liquid

Soluble In: Oxygenated organic solvents

Slightly soluble in: Water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

Superox 46-771

Chemical Name:

methyl ethyl ketone peroxide & cumyl hydroperoxide

Superox 46-771 in a solution of methyl ethyl ketone peroxides and cumyl hydroperoxide in phlegmatizer. Superox 46-771 is a liquid polymerization initiator for the room temperature cure of specialized unsaturated polyester and vinyl ester resins.

Application Details:

Superox 46-771 is an excellent liquid polymerization initiator for the room temperature cure of unsaturated polyester and vinyl ester resins, when a low peak exotherm is desired.

Active Oxygen Content: 9.0 %, max.

Physical Appearance: Water white liquid

Soluble In: Oxygenated organic solvents

Slightly soluble in: Water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

Superox 46-763

Chemical Name:

cumyl hydroperoxide

CAS Numbers:

80-15-9

Superox 46-763 is a solution of cumyl hydroperoxide in an accelerating phlegmatizer.

Application Details:

The principal application for Superox 46-763 is as a cure initiator for room temperature curing of vinyl ester and specialized unsaturated polyester resins.

Active Oxygen Content: 0.045

Physical Appearance: Pale yellow to colorless liquid

Soluble In: Oxygenated organic solvents

Slightly soluble in: Water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

Superox 46-762

Chemical Name:

methyl ethyl ketone peroxide & tertiary butyl hydroperoxide

Superox 46-762 is a solution of peroxides in phlegmatizer.

Application Details:

Superox 46-762 is formulated for use in applications requiring a lower exotherm without significant sacrifice of gel time.

Active Oxygen Content: 8.9 - 9.0 %

Physical Appearance: Water white liquid

Soluble In: Oxygenated organic solvents

Insoluble In: Water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

Superox 46-753

Chemical Name:

methyl ethyl ketone peroxide & cumyl hydroperoxide

Superox 46-753 is a solution of methyl ethyl ketone peroxides and cumyl hydroperoxide in phlegmatizer.

Application Details:

Superox 46-753 is an excellent liquid polymerization initiator for the room temperature cure of unsaturated polyester and vinyl ester resins, when a low peak exotherm is desired.

Active Oxygen Content: 9.0 %, max.

Physical Appearance: Pale yellow liquid

Soluble In: Oxygenated organic solvents

Slightly soluble in: Water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

Superox 46-750

Chemical Name:

acetyl acetone peroxide & cumene hydroperoxide

Superox 46-750 is an excellent liquid general-purpose cure initiator for the room temperature cure of polyester resins.

Application Details:

Superox 46-750 is formulated specifically for use in RTM and tooling resins.

Active Oxygen content: 5.6 %, max.

Physical Appearance: Water white liquid

Soluble In: Oxygenated organic solvents

Slightly soluble in: Water

Storage Temperature: 80°F or below (Below 70°F recommended for maximum shelf life.)

Technical Data Sheet

MSDS

SDS