Vacuum Infusion | Syrgis Performance Initiators

Norox® MEKP - 925 RED

Chemical Name:

methyl ethyl ketone peroxide composition

Norox MEKP-925 RED has a high MEKP dimer content that gives excellent performance in most vinyl ester resins. Also performs well when used with general purpose ortho and isophthallic resins. Norox MEKP-925 RED should be considered when an initiator is desired for use with most all resin types.

Application Details:

Excellent cure initiator for both unsaturated polyester resins and vinyl ester resins.

Technical Data Sheet

SDS

Norox® MEKP - 925 FRED

Chemical Name:

methyl ethyl ketone peroxide

MEKP-925 FRED has a high MEKP dimer content that gives excellent performance in most vinyl ester resins. It also performs well when used with general purpose ortho and isophthallic resins.

Application Details:

MEKP-925 FRED is formulated to be an excellent cure initiator for both unsaturated polyester resins and vinyl ester resins. With most unsaturated polyesters, it gives longer gel and gel to cure times, but with a higher peak exotherm than Norox MEKP-9, particularly in thick sections.

Technical Data Sheet

SDS

Norox® FS-100/9

Chemical Name:

methyl ethyl ketone peroxide

CAS Numbers:

1338-23-4

Norox FS-100/9 is an MEKP formulation high in hydrogen peroxide content that provides fast gel and green strength development.

Application Details:

Norox FS-100/9 is primarily used in highly filled resin systems. It is not recommended for gel coats or vinyl ester resins.

Technical Data Sheet

MSDS

Norox® 771

Chemical Name:

methyl ethyl ketone peroxide & cumyl hydroperoxide

CAS Numbers:

1338-23-4 & 80-15-9

Norox 771 is a solution of methyl ethyl ketone peroxides and cumyl hydroperoxide in phlegmatizer.

Application Details:

Norox 771 is an excellent liquid polymerization initiator for the room temperature cure of unsaturated polyester and vinyl ester resins, when a low peak exotherm is desired.

Technical Data Sheet

MSDS

Andonox® KP - LE

Chemical Name:

Methyl Ethyl Ketone Peroxide (MEKP)

ANDONOX KP - LE is a methyl ethyl ketone peroxide (MEKP) in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

Application Details:

ANDONOX KP-LE is a methyl ethyl ketone peroxide (MEKP) with higher content of free hydrogen peroxide (H2O2) to provide shorter gel time then the ANDONOX KP-9. It is suitable for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and vacuum infusion.

Active Oxygen Content: 8.7 - 9.0 %

Physical Appearance: Colourless and clear liquid

Soluble In: Oxygenated organic solvents

Insoluble In: Water

Storage Temperature: Max 25C

Technical Data Sheet

MSDS

SDS

Norox® Pulcat® AW

Chemical Name:

methyl isobutyl ketone peroxide

CAS Numbers:

37206-20-5

Norox Pulcat AW is a proprietary peroxide solution in phlegmatizer primarily used for cure initiation of unsaturated polyester and vinyl ester resins in the pultrusion process.

Application Details:

Norox Pulcat AW can also be used in cobalt promoted resins for ambient temperature cures.

Technical Data Sheet

MSDS

Norox® MEKP - 9H

Chemical Name:

methyl ethyl ketone peroxide

CAS Numbers:

1338-23-4

NOROX MEKP - 9 H is a methyl ethyl ketone peroxide (MEKP) in phlegmatizer for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

Application Details:

NOROX MEKP-9H is a methyl ethyl ketone peroxide which features a reduced level of hydrogen peroxide compared to Andonox KP - 9 and gives a longer gel time when workshop and resin temperatures increase during warm weather.

Technical Data Sheet

MSDS

SDS

Norox® MEKP - 925 H

Chemical Name:

methyl ethyl ketone peroxide

CAS Numbers:

1338-23-4

NOROX MEKP - 925H is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both unsaturated polyester resins and vinyl ester resins.

Application Details:

NOROX MEKP - 925H is specifically formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in gel coats, barrier coatings, and corrosion resistant structures.

Technical Data Sheet

MSDS

SDS

Norox® MEKP - 925

Chemical Name:

methyl ethyl ketone peroxide

CAS Numbers:

1338-23-4

Norox MEKP-925 is a methyl ethyl ketone peroxide composition formulated to be an excellent cure initiator for both unsaturated polyester resins and vinyl ester resins.

Application Details:

Norox MEKP-925 has a high MEKP dimer content that gives excellent performance in most vinyl ester resins.

Technical Data Sheet

MSDS

SDS

Norox® MEKP - 900

Chemical Name:

methyl ethyl ketone peroxide

CAS Numbers:

1338-23-4

Norox MEKP - 900 is a methyl ethyl ketone peroxide (MEKP) with a high hydrogen peroxide level that can offer faster gel times at low ambient temperatures in most resin systems.

Application Details:

Norox MEKP-900 is a specially formulated methyl ethyl ketone peroxide (MEKP) composition for the room temperature cure of unsaturated polyester resins.

Technical Data Sheet

MSDS

SDS