Centrifugal Casting

In combination with cobalt accelerated resins, Andonox SHP-10 has shown to be an exceptionally good cure system for unsaturated polyesters both at ambient and elevated temperatures. (See Technical Data Sheet)

Norox FS-100/9 is primarily used in highly filled resin systems. It is not recommended for gel coats or vinyl ester resins.

ANDONOX KP-LE is a methyl ethyl ketone peroxide (MEKP) with higher content of free hydrogen peroxide (H2O2) to provide shorter gel time then the ANDONOX KP-9. It is suitable for hand lay-up, spray-up, RTM, continuous laminating, centrifugal casting, filament winding, polyester concrete and vacuum infusion.

Norox MEKP-900 is a specially formulated methyl ethyl ketone peroxide (MEKP) composition for the room temperature cure of unsaturated polyester resins.

Norox MEKP-30 provides more accurate metering control in hot weather or with highly reactive resin systems and is an excellent liquid initiator for the polymerization of vinyl monomers and is particularly useful in the room temperature cure of polyester resins.

Norox MEKP-9 is an excellent general-purpose methyl ethyl ketone peroxide (MEKP) type cure initiator for the room temperature cure of polyester resins.  MEKP-9 provides medium to high exotherm characteristics to the cure.

MEC provides excellent cure performance in low and average temperature conditions when used as an initiator with unsaturated polyester resins.

MEC-EX is formulated for gel and cure initiation for cobalt promoted unsaturated polyester resins at low operating temperatures.

Norox MCP-21 is a liquid polymerization initiator for the room temperature cure of specialized unsaturated polyester and vinyl ester resins.