Bonding Pastes and Putty

Norox FS-100/9 is primarily used in highly filled resin systems. It is not recommended for gel coats or vinyl ester resins.

NOROX MEKP-9H is a methyl ethyl ketone peroxide which features a reduced level of hydrogen peroxide compared to Andonox KP - 9 and gives a longer gel time when workshop and resin temperatures increase during warm weather.

Norox MEKP-900 is a specially formulated methyl ethyl ketone peroxide (MEKP) composition for the room temperature cure of unsaturated polyester resins.

Norox MEKP-9 is an excellent general-purpose methyl ethyl ketone peroxide (MEKP) type cure initiator for the room temperature cure of polyester resins.  MEKP-9 provides medium to high exotherm characteristics to the cure.

MEC-EX is formulated for gel and cure initiation for cobalt promoted unsaturated polyester resins at low operating temperatures.

MEC provides excellent cure performance in low and average temperature conditions when used as an initiator with unsaturated polyester resins.

See Technical Data Sheet

BENOX L-40LV is a dibenzoyl peroxide (BPO) specifically designed for use in “curing” unsaturated polyester and vinyl ester resins and can also be used as a polymerization initiator for vinyl monomers, (e.g. styrene, acrylate, etc.).

BENOX® C-50 is a dibenzoyl peroxide (BPO) formulation which can be used as a cure initiator for unsaturated polyester resins in both elevated temperature cure and ambient temperature cure (in combination with amine accelerators) processes.

BENOX® B-50  is a benzoyl peroxide paste (BPO paste) which is principally used as polymerization initiator and curing agent for monomeric vinyl, acrylic, styrene and unsaturated polyester/vinyl ester resins, and copolymers of these resins, provided the plasticizer and water content can be tolerated.